Updating printer firmware

Rated 3.92/5 based on 612 customer reviews

The utility does not detect other disk encryption solutions.Compatibility ● The HP TPM Configuration Utility is supported on 2015 commercial platforms that have Infineon SLB9670 TPM chip and the latest Commercial BIOS (supported platforms listed in the SCOPE). TPM 2.0 is not supported on HP platforms with Windows 7.IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS OF THIS AGREEMENT, DO NOT DOWNLOAD THE SOFTWARE.IN SUCH EVENT, YOU WILL NOT BE ABLE TO USE THE SOFTWARE 1.It is always recommended to install the latest available updates to keep your network safe and efficient.Most routers have a built-in update checker, which may or may not perform the entire process automatically.Copy the firmware update file to the first window that appears when the SD card is opened (the root directory). *When removing the SD card, be sure to do so as described in the documentation for the computer or the card reader. *If the firmware update screen does not appear on LCD monitor, the firmware update file may not have been properly copied to the SD card, so please try again starting from Step (1).

Since we are receiving inquiries on Trusted Platform Module (TPM), we are offering this assistance on updating the TPM firmware and converting between TPM 1.2 and 2.0.

doc Id=emr_na-c05192291&sp4ts.oid=8818661 Version: 6.41-7.41 Revision: A, pass: 1 Release Date: 2016-06-30 Last Updated: 2016-07-19 Applicable on: 2015 desktops, notebooks, and workstations More details about HP Drive Encryption, HP Protect Tools, TPM 1.2/2.0, Bit Locker and Windows 10 Anniversary Update (Windows 10 Version 1607) can be found in this thread: HP Drive Encryption and Windows 10 Anniversary Update The HP TPM Configuration Utility (when used with an appropriate TPM firmware BIN file) allows for: ● Upgrading from an older TPM 1.2 FW to a newer TPM 1.2 FW ● Upgrading from an older TPM 2.0 to a newer TPM 2.0 FW ● Converting from TPM 1.2 to TPM 2.0 ● Converting from TPM 2.0 to TPM 1.2 Warning!

To avoid a complete loss of data, the drive must be in a decrypted state before using the utility.

The version of the firmware will not appear in the basic zone. (1-A) Battery Pack LP-E5(The battery pack must be fully charged.) (1-B) AC Adapter Kit ACK-E5 (sold separately) (2) SD card (64MB or more, 2GB or less) In order to supply power to the camera, either (1-A) or (1-B) is necessary.

The downloaded file will automatically self-extract, creating the firmware update file.

Leave a Reply